|
|
|
Français / English |
| HOME │ ABOUT US │ PRODUCTS │ CONTACT US │ SALES │TERMS & CONDITIONS |
| Fiber Optic Patch Cord |
|
|
√ | With the following connectors type : FC, SC, ST, LC, DIN, MTRJ, E2000, MU, MPO, D4, etc |
 |
|
Fiber optic patch cord is suited for equipment jumper cord, cross connects, and work area connections. All patch cords are manufactured using riser grade cable and are factory tested to make sure performance to meet Telcordia standards. Patch cords are available in both multimode and singlemode, in duplex and simplex |
|
| √ | Exellent side load performance | |||||
| √ | Easy installation and environmentaly stable | |||||
| √ | Single mode or Multimode | |||||
| √ | Simplex or Duplex |
|
Fiber Type |
Single mode ( 9/125 ) | Multimode ( 50/125 & 62.5/25 ) | |||||
| Nominal Fiber OD | 125 ± 0.2µm | 125 ± 0.2µm | |||||
| Connector type | SC, FC, ST, E2000, LC, MU, DIN, MPO and D4 | MTRJ | SC, FC, ST, E2000, LC, MU, DIN, MPO and D4 | MTRJ | |||
| Insertion loss ( Typical ) | 0.2dB | 0.3dB | 0.2dB | 0.3dB | |||
| Insertion loss ( Max ) | 0.3dB | 0.5dB | 0.3dB | 0.5dB | |||
| Return loss ( Typical ) | PC | 45dB | 40dB | - | |||
| UPC | 55dB | - | - | ||||
| APC | 65dB | - | - | ||||
| Mating durability ( 500 cycles 9 | ≤ 0.2dB | ||||||
| Temperature stability | ≤ 0.3dB | ||||||
| Operating Temperature | -40°C up to +80°C | ||||||
| Storage Temperature | -55°C up to +85°C | ||||||
|
|
Copyright © by HAPP All rights reserved |